USB to RJ10 4P4C Serial Console Cable for BRESSER EXOS 2 GOTO
Cable Info: 28AWG*3C,bare copper,PVC Jacket
Chipset: FTDI FT232RNL
Signal: RS232
Length: 1.8m, 3m, 5m Optional
EXOS2-GT USB PC Interface Cable allows you to connect the BRESSER EXOSII GOTO EQ handset to the USB port of a PC or laptop using the new Bresser Driver that is compatible with ASCOM to operate the mount using Windows navigation software via ASCOM.
Also EXOS2-GT USB PC Interface Cable is designed to control your computerized telescope from a laptop or PC through various programs of the planetarium.
Unlike the standard EXOS2-GT CABLE SET, for EXOS2-GT USB PC Interface Cable, a serial port adapter is not required.
Using this USB cable, you can upgrade the EXOS2 TO EQ manual controller firmware to version 2.3 and work in conjunction with the new ASCOM compatible Bresser driver to control the mount using Windows navigation software via ASCOM.
The USB interface cable is used with the Bresser Goto control system for equatorial mounts, which is supplied as standard equipment for the BRESSER and Explore Scientific exos-2 mounts.
Connecting a computer to your telescope will also allow you to move the telescope from different planetarium programs! Today, there are many programs available that not only display the night sky, as it appears on any chosen observation night, but this will allow you to send your telescope to any object on the screen at the touch of a button.
VIRTUAL COM PORT (VCP) Drivers are available for the following Operating Systems (OS):
- Windows 11,10,8.1,8,Vista,7,XP
- Windows 98, 98SE, ME, 2000, - Server 2003, XP, Server 2008 and server 2012 R2
- Windows XP Embedded
- Windows CE 4.2, 5.0 and 6.0
- Mac OS 8/9, OS-X
- Linux 2.4 and greater - Android(J2xx / D2xx only)
See the following website link for the full driver support list including OS versions and legacy OS.
https://ftdichip.com/drivers/
Virtual COM Port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.
Please also refer to the Installation Guides documents for details on how to install the drivers.
https://ftdichip.com/document/installation-guides/

The FTDI FT232RNL Chip Features:
1. Single chip USB to asynchronous serial data transfer interface.
2. Entire USB protocol handled on the chip. No USB specific firmware programming required.
3. Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
4. Fully integrated USB termination resistors.
5. Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
6. Data transfer rates from 300 baud to 3 Mbaud(RS422, RS485, RS232) at TTL levels.
7. 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
8. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
9. Unique USB FTDIChip-ID™ feature.
10. Configurable CBUS I/O pins.
11. Transmit and receive LED drive signals.
12. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space /no parity
13. FIFO receives and transmits buffers for high data throughput.
14. Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
15. Device supplied pre-programmed with unique USB serial number.
16. Supports bus powered, self-powered and highpower bus powered USB configurations.
17. Integrated +3.3V level converter for USB I/O.
18. Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
19. True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
20. Configurable I/O pin output drive strength.
21. Integrated power-on-reset circuit.
22. Fully integrated AVCC supply filtering - no external filtering required.
23. UART signal inversion option.
24. +3.3V (using external oscillator) to +5.25V (internal oscillator) Single Supply Operation.
25. Low operating and USB suspend current.
26. Low USB bandwidth consumption.
27. UHCI/OHCI/EHCI host controller compatible.
28. USB 2.0 Full Speed compatible.
29. -40°C to 85°C extended operating temperature range.
30. Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).